PRIMCOR Products: Curtain wall systems, Tilt and Turn windows and doors, Lift and Slide doors, Folding Doors, External Doors, Banisters, Solar Shading solutions, Office partitions.

Energy Ratings
Building Codes of Europe and North America now place stringent requirements on the energy efficiency of the buildings design.The glazing system used is a major contributor to a building's energy performance .Double or triple glazing is the most cost-effective way of meeting these requirements. All of Primcor's systems are specifically designed to accept the thermally efficient double or triple glazing units .All of Primcors systems have been rated by Ekanal, and IFT Rosenheim Institute, the independent industry energy body responsible for measuring the thermal efficiency of the entire glazed window and doors .

Please contact us and talk to our Technical Service people about the changing energy regulations and how a Primcor system will allow you to meet the new building and energy standards now being applied.

Primcor Testing Laboratory
With our in house testing laboratory we tests various windows, sliding doors and custom curtain wall combinations. These tests have been both for specific projects and the research and development of various framing systems and glazing techniques. This in-house testing facility allows us to, provide customer satisfaction through the performance and compliance of our products and secondly, achieve customer confidence by continuing to supply products that reflect outstanding reliability and quality.
General Specifications:
Test methods (that can be undertaken at the test lab) include A2047 including the A442test methods. Testing to AS/NZS 4284 requirements and relevant ASTM test methods.
Test chamber can be modified to suit specific test sample, depending on sample type and test standard to be utilized.
Maximum size of test sample: approx. 9 meters (h) x 9 meters (w).

Static Pressure Range: approx. 0 - 8 kPa. (positive and negative)
Wind gusting simulation by cyclic pressure: 3 - 5 seconds(monitored by chart recorder)
Displacement transducer recording of sample deflections.(maximum of 45 readings)
Air infiltration measurement by orifice plates.
Maximum water flow rate of approx. 0 - 270 L/min.

Research and Development
WinFassade is a software producing static analysis for curtain-wall structures thus helping for the selection of the appropriate mullion or transom profile in terms of Moment of inertia.
AL 101
  EKANAL
•EN •GR(2005) •GR(2006)
SOUND INSULATION
•OptionA •OptionB
AL 130
  EKANAL
•DE •DE(UValue)
IFT ROSENHEIM
•DE •DE(UValue) •EN •FR
AL 101C
  EKANAL
•EN(12/18/2008) •GR(12/18/2008)
•EN(01/30/2008) •GR(01/30/2008)
AL 207
  EKANAL
•EN
AL 102
  IFT ROSENHEIM
•EN •DE •FR
AL 215
  EKANAL
•GR
SOUND INSULATION
•GR
AL 108
  EKANAL
•EN(2006) •DE(2006) •DE(2004)
SOUND INSULATION
•GR
AL 220
  EKANAL
•GR
AL 108C
  EKANAL
•GR(12/19/2008) •GR(09/04/2008)
AL 225
  EKANAL
•GR
IFT SOUND •DE
IFT THERMAL •DE
AL 109
  EKANAL
•EN(10/26/2005) •GR(10/26/2005) •GR(02/02/2005)
IFT ROSEHEIM •DE
SOUND INSULATION •GR
AL 225LS
  IFT THERMAL
•DE
AL 110
  EKANAL
•GR(2008) •EN(2008) •GR(2005)
IFT ROSEHEIM
•DE
AL 230
  EKANAL
•EN •EN •GR
IFT SOUND •DE(partA) •DE(partB)
IFT THERMAL •DE
AL 112
  EKANAL
•EN(AIR) •EN •GR
IFT ROSEHEIM
•DE(part1) •DE(part2)
AL 705
  EKANAL
•GR(partA) •GR(partB)
SOUND INSULATION
•GR(partA) •GR(partB)
AL 120
  EKANAL
•EN(02/08/2005) •EN(01/31/2005
•GR(02/08/2005) •GR(01/31/2005)
THERMAL INSULATION •DE
SOUND INSULATION •GR
AL 205
  EKANAL
•EN •GR
SOUND INSULATION
•GR
AL 120C
  EKANAL
•GR(09/03/2008) •GR(09/08/2008)
THERMAL INSULATION
•DE