PRIMCOR Products: Curtain wall systems, Tilt and Turn windows and doors, Lift and Slide doors, Folding Doors, External Doors, Banisters, Solar Shading solutions, Office partitions.
   FLASH
   PARTITION
     > Mur Rideau > AL 102> Survol

AL 102 Curtain Wall System

The AL 102 Curtain Wall system is PRIMCOR's response to the aluminium construction field. It is the top Semi-Structural and Structural Glazing curtain-wall system, when viewed externally the opening vents and the fixed glass panels have the same visual appearance. Transoms and mullions which are only seen from the inside, have an internal face of 71.6mm This curtain wall system is modular and mullion drained. a complete series of designed profiles can correspond to almost any architectural demand. With our new profiles, we try to encourage constructors to enter the Curtain Wall field and experienced our flexible system. Our designed profiles basic characteristic is that there are no bolt keepers on the transoms of the glazing panels., with properly designed accessories they just hook and hold on the top and project the window outwards. A handle can be placed quickly and easily at any time and on any glass panel chosen on the bottom to project the window outwards, there is a choice of handles from manual push out, crank or electric that can open the window out from 15cm to 30cm.

The system is designed in a way that enables it to "absorb" any construction imperfection of a building's shell .The advantages of our system is easy assembly of the glass in the shop and the panellised frames are then easily placed on the curtain wall grids on site Each glazed panel has a visible face of 19mm in width which in combination with a 12mm recess between the panels, gives an overall sightline of 50mm. A structurally glazed version of the system is also available, giving the facade an all glass appearance when viewed from the outside, with only a 17 mm recessed gap between each pane. The AL 102 Curtain Wall system guarantees safe, resistant and aesthetic facades constructed with a low cost that is due to the production Maximum glass thickness is 26mm for the structurally glazed version of this system, the maximum glass thickness is dependant on various factors, which are specific for each individual project. We advise therefore, that you contact our Architectural Advisers for more information. The AL 102 has been tested in the most stringent conditions.

   Survol (Cliquez sur l’image pour l’agrandir)
 
     Télécharger
     Survol
     Caractéristiques
     Avantages
     Propriétés du verre
     Renseignements      techniques